RAM Combo Locking Power Dock for Honeywell RT10: Setup Guide

Quick answer

Mount the dock securely, connect power, and seat the Honeywell RT10 until it locks. Verify charging via the LED indicator.

Setup steps

1. Mount the dock: Use the included hardware to attach the dock to your chosen surface. Tighten all screws firmly. A loose mount can prevent the locking mechanism from engaging. Check that the dock does not wobble before proceeding.
2. Connect power: Plug the power adapter into the dock's power input and into a suitable power source. The dock does not include a battery; it requires continuous external power. Use the supplied adapter only; third-party adapters may not provide enough current.
3. Insert the Honeywell RT10 tablet: Align the tablet's charging contacts with the dock's pins. Press down firmly until you hear or feel a click from the locking mechanism. If the tablet does not lock, remove it and check for debris on the contacts or in the dock slot.
4. Verify charging: Look for the LED indicator on the dock. A solid or blinking light typically means charging is active. Refer to your dock's manual for exact LED behavior. If the LED does not light, confirm the power connection and that the tablet is fully seated.
5. Use the dual USB ports: Connect a secondary device, such as a phone or scanner, to one of the USB ports on the dock. These ports share power with the tablet charger, so charging may be slower when both are in use. For fastest tablet charging, avoid using the USB ports simultaneously.

Product facts

• RAM® Combo Locking Power + Dual USB Dock for Honeywell RT10 Tablet: The RAM® Combo Locking Power + Dual USB Dock for Honeywell RT10 Tablet provides a secure and convenient charging solution with a locking power connection and dual USB ports. The locking connection ensures the tablet stays powered even on rough roads, while the extra USB port lets you charge a phone or scanner at the same time.