블로그로 돌아가기
사용 방법 가이드 2026-11-20 RAM® Mounts | Best Phone, Tabletand Laptop Mounts for Cars and ... 0 조회수

RAM X-Grip 및 Tough-Claw: 파이프에 태블릿 장착

RAM X-Grip 및 Tough-Claw: 파이프에 태블릿 장착

RAM X-Grip과 Tough-Claw를 사용하여 9"에서 11" 태블릿을 파이프에 장착하는 방법을 알아보세요. 단계별 설정 가이드 및 주요 고려 사항.

What This Mount Does

The RAM X-Grip with RAM Tough-Claw 9" Pipe Mount is designed to securely hold a 9" to 11" tablet on a pipe. It combines the adjustable X-Grip holder with the clamping strength of the Tough-Claw, making it a practical choice for workshops, vehicles, or anywhere a pipe is available for mounting.

Key Details from the Catalog

Mounting Your Tablet on a Pipe

Follow these steps to attach your tablet securely to a pipe using the RAM X-Grip with Tough-Claw. The process is straightforward, but check each step against your specific setup.

  1. 1. Prepare the pipe surface: Ensure the pipe is clean and within the 9" diameter capacity of the Tough-Claw clamp. A smooth, round pipe provides the best grip.
  2. 2. Attach the Tough-Claw clamp to the pipe: Open the clamp jaws, position them around the pipe, and tighten the knob until the clamp is secure. Verify it does not slip or rotate under light pressure.
  3. 3. Adjust the X-Grip holder: Open the X-Grip arms fully. Place your 9" to 11" tablet against the back of the holder, then press the arms inward until they grip the edges firmly. The spring-loaded arms adjust to the tablet width automatically.
  4. 4. Position the tablet angle: The mount includes a ball-and-socket joint that allows you to tilt and rotate the tablet. Tighten the adjustment knob to lock the desired viewing angle.
  5. 5. Test the setup: Gently push the tablet to confirm it is secure. The X-Grip should hold it without slipping, and the Tough-Claw should remain tight on the pipe.

What the Catalog Does Not Specify

The catalog does not provide a specific torque value for tightening the Tough-Claw clamp or the X-Grip adjustment knob. Tighten until the components are secure but avoid overtightening, which could damage the clamp or tablet. Also, the catalog does not list the exact material of the clamp or holder, though the system is described as built with durable materials for long-lasting performance.

Practical Considerations

This mount works best on a horizontal or vertical pipe that is easily accessible. The Tough-Claw clamp is designed for pipes up to 9" in diameter, so measure your pipe before installation. The X-Grip holder accommodates tablets with or without cases, but very thick cases may affect the grip. If you use a case, test the fit before finalizing the mount position.

관련 게시글

Customer Service
홈
상품
장바구니
내 정보